Differences

This shows you the differences between two versions of the page.

--- lasercutter [2025/02/04 12:23] – sysop
+++ lasercutter [2025/02/04 14:02] (current) – sysop
@@ Line 12: / Line 12: @@
   * Etching-lines must be RGB blue[0,0,255] hairlines(vector). These lines will be cut halfway through\\
   * Placement-lines must be RGB green[0,255,0] hairlines(vector). Nothing will be done with them, they can help with placement or other info\\
-  * Other lines thinner as 0,11mm are considerd to be hairlines even if they are not red and will be cut.\\
+  * Other lines thinner as 0,11mm are considerd to be hairlines however it is unpredictable what will happen.\\
   * Engraving parts are greylevel lines/parts or bitmaps. Black [255] is highest engraving power, white least [0].\\
@@ Line 38: / Line 38: @@
 **Materials that the SmartXP can facilitate**\\
 //Payment only via your Proto Omnomcom-account, purchases entered by the Technician//\\
 Plywood 4x570x190mm    Birch    € 2.50\\
 Plywood 4x570x750mm    Birch    € 9.10\\