Differences

This shows you the differences between two versions of the page.

--- accelerometers [2014/03/05 11:35] – sysop
+++ accelerometers [2019/10/03 09:22] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
 **Accelerometers**\\
 \\
-**Warning: those accelerometers operate on a 3.3 volt powersupply! Do not use 5 volt.**\\
+**Warning: MMA7260Q and MMA7361L accelerometers operate on a 3.3 volt powersupply! Do not use 5 volt.**\\
 \\
 Triple Axis Accelerometer Breakout - MMA7260Q\\
@@ Line 14: / Line 14: @@
 {{mma7361-schematic.pdf | schematic}}\\
 {{mma7361l_data_sheet.pdf | manual}}\\
-{{tilt_sensing_using_a_three-axis.pdf|application note}}
+{{tilt_sensing_using_a_three-axis.pdf|application note}}\\
+\\
+**MPU-6050 Accelerometer + Gyro**\\ {{ ::mpu-6050_accelerometer_gyro.jpg?direct&300|}}
+\\
+The MPU-6050 devices combine a 3-axis gyroscope and a 3-axis accelerometer on the same silicon die, together with an onboard Digital Motion Processor™ (DMP™), which processes complex 6-axis MotionFusion algorithms. The device can access external magnetometers or other sensors through an auxiliary master I²C bus, allowing the devices to gather a full set of sensor data without intervention from the system processor.\\
+\\
+http://playground.arduino.cc/Main/MPU-6050 {{::arduino_playground_-_mpu-6050.pdf| or find this page here}}\\
+\\
+https://diyhacking.com/arduino-mpu-6050-imu-sensor-tutorial/ {{::imu_get_started_with_arduino_and_the_mpu_6050_sensor_.pdf| or find this page here}}\\
+{{::mpu6050.zip| MPU6050 Arduino library}}\\
+{{::i2cdev.zip| i2cdev}}\\
+{{::toxiclibs-complete-0020.zip|toxiclibs}}\\