This is an old revision of the document!
We have 4 normal types which are almost identical:
ES-030
RS2
Operating voltage: 4.8 < 6.0 v
Positioning time: 4.8 v I 6.0 v: 0.19s/60° I 0.11s/60°
Operating torque 4.8V I 6.0V: 3.2 kg.cm I 3.5 kg.cm
weight: ca. 39g
Torque: 3kg/cm
Gear: plastic
Parallax standard servo
rc car servo_4519
We also have a few adapted servo's who now are continuous rotating servo's. They do not rotate to a certain position but
rotate continuously with a controllable speed and direction.
An explanation on how servo's work can be found here.
Here you can find how to control a servo with your Arduino
If you want to design a wheel or arm that should be fixed on those servos, you can use this for the hole for the axis.
Page Tools
