smartxp wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
**Accelerometers**\\
\\
**Warning: MMA7260Q and MMA7361L accelerometers operate on a 3.3 volt powersupply! Do not use 5 volt.**\\
\\
Triple Axis Accelerometer Breakout - MMA7260Q\\
{{tri-ax_mma7260q.jpg:?200}}\\
{{tri-ax-schematic-v01.pdf | schematic}}\\
{{mma7260q-rev1.pdf | manual}}\\
\\
\\
Triple Axis Accelerometer Breakout - MMA7361L\\
{{mma7361.jpg:?200}}\\
This is a breakout board for Freescale's MMA7361L three-axis analog MEMS accelerometer. The sensor requires a very low amount of power and has a g-select input which switches the accelerometer between ±1.5g and ±6g measurement ranges. Other features include a sleep mode, signal conditioning, a 1-pole low pass filter, temperature compensation, self test, and 0g-detect which detects linear freefall. Zero-g offset and sensitivity are factory set and require no external devices.\\
{{mma7361-schematic.pdf | schematic}}\\
{{mma7361l_data_sheet.pdf | manual}}\\
{{tilt_sensing_using_a_three-axis.pdf|application note}}\\
\\


**MPU-6050 Accelerometer + Gyro**\\ {{ ::mpu-6050_accelerometer_gyro.jpg?direct&300|}}
\\
The MPU-6050 devices combine a 3-axis gyroscope and a 3-axis accelerometer on the same silicon die, together with an onboard Digital Motion Processor™ (DMP™), which processes complex 6-axis MotionFusion algorithms. The device can access external magnetometers or other sensors through an auxiliary master I²C bus, allowing the devices to gather a full set of sensor data without intervention from the system processor.\\
\\
http://playground.arduino.cc/Main/MPU-6050 {{::arduino_playground_-_mpu-6050.pdf| or find this page here}}\\
\\
https://diyhacking.com/arduino-mpu-6050-imu-sensor-tutorial/ {{::imu_get_started_with_arduino_and_the_mpu_6050_sensor_.pdf| or find this page here}}\\
{{::mpu6050.zip| MPU6050 Arduino library}}\\
{{::i2cdev.zip| i2cdev}}\\
{{::toxiclibs-complete-0020.zip|toxiclibs}}\\
smartxp wiki

User Tools

Site Tools

Page Tools
