smartxp wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

**2.2 inch TFT Display 240*320 pixels - ILI9341**\\
\\
{{ ::2.2_inch_tft_display_240320_pixels_-_ili9341.jpg?400|}}\\

240*320 pixels\\
Spanning(voeding en signaal): **3.3V**\\
Afmetingen: 67 x 40 x 7mm (gesoldeerde pin headers niet meegerekend)\\
Werkt met SPI\\
Met ingebouwde SD-kaart lezer(apart aansluiten op SD kaart pinnen)\\
Mogelijkheid om SPI flashchip(alleen 3.3V) te solderen bij U3\\
Driver: ILI9341 (of compatible)\\

Pin description for SD card and SPI flash pins:\\
SD_CS: Chip select signal (for SD card)\\
SD_MOSI: SPI MOSI signal (for SD card and SPI flash chip)\\
SD_MISO: SPI MISO signal (for SD card and SPI flash chip)\\
SD_SCK: Clock signal (for SD card and SPI flash chip)\\
F_CS:  Chip select signal (for SPI flash chip)\\

Note: The SPI pins for the display and the SD cards SPI flash chip work at 3.3V. So use a level converter if\\ necessary.\\
\\
The display can be used with Arduino together with the Adafruit ILI9341 library. (requires the Adafruit GFX Library)This library can be downloaded in the Arduino IDE.\\