Differences

This shows you the differences between two versions of the page.

--- ultrasonic_distance_sensors [2018/10/08 14:03] – sysop
+++ ultrasonic_distance_sensors [2022/11/17 13:11] (current) – sysop
@@ Line 1: / Line 1: @@
 **Ultrasonic distance sensors**
-Ultrasonic sensor module US-100 {{  us-100-ultrasonic-sensor-1.jpg::?200|}}
+__Ultrasonic sensor module US-100__ {{  us-100-ultrasonic-sensor-1.jpg::?200|}}
 The ultrasonic sensor module us-100  is a convenient way for measuring distances from objects. This module has a lot of applications such as parking sensors, obstacle and terrain monitoring systems, industrial distance measurements, etc. It has a stable performance and high accuracy ranging from 2cm to 450cm. The module sends an ultrasonic signal, eight pulses of 40kHz square wave from the transmitter; the echo is then picked up by the receiver and outputs a waveform with a time period proportional to the distance. The connected microcontroller accepts the signal and performs necessary processing.\\
-The US-100 can have a dip-switch. if it has, the switch in place the US-100 will give a serial output. Whitout it will give an analog output.\\
+The US-100 can have a //dip-switch//. if it has, with the switch in place the US-100 will give a serial output.\\ Without it will give an analog output.\\
+The US-100 has 2 groundpins. They need to be connected both.\\
 Specifications:\\
@@ Line 18: / Line 21: @@
 Weight: 43g\\
-some examples can be found here: [[http://arduinoinfo.mywikis.net/wiki/UltraSonicDistance|]]
+some examples can be found here: [[http://arduinoinfo.mywikis.net/wiki/UltraSonicDistance|]]\\
+{{::ultrasonic_sonar_module_1r0.pdf|manual from Gizmo}}\\
+{{::us_100_ultrasonic_sensor_module.pdf|manual}}\\
+\\
+__Ultrasonic sensor module HC-SR04__ {{ ::ultrasonic-sensor_hc-sr04.jpg?200|}}
+The HC-SR04 has no digital output and only one groundpin.\\
+Specifications:\\
+Power Supply :+5V DC\\
+Quiescent Current : <2mA\\
+Working Current: 15mA\\
+Effectual Angle: <15°\\
+Ranging Distance : 2cm – 400 cm/1″ – 13ft\\
+Resolution : 0.3 cm\\
+Measuring Angle: 30 degree\\
+Trigger Input Pulse width: 10uS\\
+Dimension: 45mm x 20mm x 15mm\\
+{{ ::hc-sr04_diagram.png?300 |}}
+{{::hc-sr04_ultrasonic_module_user_guidejohn.pdf|HC-SR04 User Guide}}\\
+{{ ::hc-sr04_user_manual.pdf | HC-sr04 user manual}}\\
+[[https://randomnerdtutorials.com/complete-guide-for-ultrasonic-sensor-hc-sr04/ | complete-guide-for-ultrasonic-sensor-hc-sr04]]
+ __Ultrasonic sensor module JSN-SR04T__ {{ ::jsn-sr04t-1000x1000.jpg?300|}}
+Ranging Distance: 20-450cm\\
+Power Supply: 5V\\
+Working Current: <8mA\\
+Resolution: 1mm\\
+Nauwkeurigheid: ± 10mm\\
+Measuring Angle: <75 degree\\
+Dimension: 42mm x 29mm x 12mm\\
+Kabellengte: ~250cm\\
+Can be used like the HC-SR04\\